BRTJL - M-133-01 CARBON DIOXIDE (CO2)
- MSDS: BRTJL
- Manufacturer: METALCRAFT INC
- Product Name: M-133-01 CARBON DIOXIDE (CO2)
- National Stock Number: 4210-01-364-1623
Product Identification
Product ID:M-133-01 CARBON DIOXIDE (CO2)
MSDS Date:09/01/1993
FSC:4210
NIIN:01-364-1623
MSDS Number: BRTJL
Responsible Party
BALTIMORE, MD 21205
US
Emergency Phone: 800-457-4280
Info Phone: 410-485-0880/FAX -4451
Cage: 06535
Contractor
Telephone: 410-687-5500
Cage: 06535
Ingredients
CARBON DIOXIDE
CAS: 124-38-9
RTECS: FF6400000
Fraction By Weight: 100%
OSHA PEL 5000 PPM
ACGIH TLV: 5000PPM/30000STEL;93
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CARBON DIOXIDE IS AN ASPHYXIANT. >12%
CAUSES RAPID UNCONSCIOUSNESS AND DEATH. DIRECT CONTACT WITH LIQUID
OR SOLID WILL CAUSE BURNS, FROSTBITE OR BLINDNESS.
Explanation of Carcinogenicity:NONE OF THE INGREDIENTS IN THIS PRODUCT
IS LISTED BY NTP, IARC OR OSHA AS A CARCINOGEN.
Effects of Overexposure:HEADACHE, DIZZINESS, SHORTNESS OF BREATH,
MUSCULAR WEAKNESS, DROWSINESS, AND RINGING OF THE EARS., FROSTBITE.
Medical Cond Aggravated by Exposure:PERSONNEL WITH PRE-EXISTING CHRONIC
RESPIRATORY DISEASES OR HEART DISORDER SHOULD REFRAIN FROM
BREATHING EXCESSIVE CARBON DIOXIDE. RECOVERY IS USUALLY RAPID FROM
SHORT TERM OVEREXPOSURE.
First Aid
First Aid:FIRST AID: INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN/CPR
IF NEEDED. RESCUE PERSONNEL SHOULD WEAR SELF-CONTAINED BREATHING
APPARATUS WIHT FULL FACE MASK. SKIN/EYE: FOR FROSTBITES:RINSE OR
BATHE IN L UKEWARM WATER FOR 15 MIN. SEEK MEDICAL HELP IF
NECESSARY.
Fire Fighting
Extinguishing Media:NON-FLAMMABLE. THIS MATERIAL IS AN EXTINGUISHING
AGENT.
Fire Fighting Procedures:EVACUATE ALL PERSONNEL. IMMEDIATELY DELUGE
CONTAINERS WITH WATER SPRAY FROM MAXIMUM DISTANCE UNTIL COOL. THEN
MOVE CONTAINERS AWAY FROM FIRE IF WITHOUT RISK.
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE IN HEAT OF FIRE IF
RELIEF DEVICE FAILS.
Accidental Release
Spill Release Procedures:REMOVE PERSONNEL. VENTILATE AREA. WEAR
SELF-CONTAINED BREATHING APPARATUS. MOVE LEAKING CONTAINER OUTDOORS
IF WITHOUT RISK. SLOWLY RELEASE INTO ATMOSHPHERE. RETURN DEFECTIVE
CYLINDER TO SUPPLIER. TEST AREA FOR OXYGEN BEFORE ALLOWING
RE-ENTRY.
Handling
Handling and Storage Precautions:STORE CYLINDERS UPRIGHT IN A COOL, DRY
LOCATION, AWAY FROM DIRECT HEAT OF FLAME.
Other Precautions:IF THERE IS A LEAK, CLOSE THE CYLINDER VALVE, BLOW
DOWN SYSTEM BY VENTING TO A SAFE PLACE, THEN REPAIR LEAK.
Exposure Controls
Respiratory Protection:WEAR SELF-CONTAINED BREATHING APPARATUS WHEN
CONCENTRATIONS ARE ABOVE PEL OR USING IN A CONFINED AREA.
Ventilation:MECHANICAL (GENERAL) AND/OR LOCAL EXHAUST VENTILATION TO
KEEP EXPOSURE LEVELS BELOW PEL.
Protective Gloves:LEATHER GLOVES.
Eye Protection:SAFETY GLASSES OF FULL FACE SHIELD.
Other Protective Equipment:SELF-CONTAINED BREATHING APPARATUS. SAFETY
SHOES. DO NOT WEAR CONTACT LENSES.
Work Hygienic Practices:KEEP SAFETY VALVES IN GOOD WORKING CONDITIONS.
KEEP DEBRIS AND UNNECESSARY EQUIPMENT AWAY FROM CO2 EQUIPMENT.
Supplemental Safety and Health
CLOSE VALVE WHEN NOT IN USE AND WHEN EMPTY. CARBON DIOXIDE, BEING
HEAVIER THAN AIR, TENDS TO ACCUMULATE NEAR THE FLOOR OF AN ENCLOSED
SPACE DISPLACING THE AIR AND CREATING AN OXYGEN DEFFICIENT ATMOSPH
ERE. VENTILATE BEFORE ENTRY. VERIFY SUFFICIENT OXYGEN
CONCENTRATION.
Chemical Properties
HCC:G3
Boiling Pt:B.P. Text:-109F,-78C
Vapor Pres:GAS @ 70F
Vapor Density:1.52
Solubility in Water:SLIGHT (0.8 V/V)
Appearance and Odor:COLORLESS GAS/LIQUID, ODORLESS.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID TEMPERATURES HIGHER THAN 125F.
Hazardous Decomposition Products:IN THE PRESENCE OF AN ELECTRICAL
DISCHARGE, CARBON DIOXIDE IS DECOMPOSED TO FORM CARBON MONOXIDE AND
OXYGEN.
Disposal
Waste Disposal Methods:CONTACT YOUR LOCAL ENVIRONMENTAL OFFICER.
MANUFACTURER RECOMMENDS VENTING SLOWLY TO ATMOSPHERE WITH ADEQUATE
VENTILATIONS. DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.